NOTE: Programming must be performed using the M7310, M7324 or T7316e set.

Place the template on the set.

1. Press or and
2. Password: 266344 (Password will not appear in the display)
3. Press SHOW
4. Enter extension number
5. Press SHOW, NEXT, NEXT
6. Press Change (button below display)
   Using the dial pad, enter the letters the same way as you would a cell phone.
   Use the # key to go from letter to letter. Maximum 7 letters.
7. Press Next

   Note: To change another name, press HEADING, press NEXT or BACK accordingly to get to the next extension number, go to step 3.

8. Press or to end.